Church hall · Site survey for air source heat pumps

Checking heat pump quotes for a London church hall

A church hall in London had two very different heat pump quotes and no way to tell which was right. We surveyed the hall at short notice and calculated the heat loss room by room, giving the architect an independent figure to check the quotes against.

Inside a traditional English church with timber pews and tall windows
Photo: Philip Halling, via Wikimedia Commons (CC BY-SA 2.0). Illustrative photo, not the building in this case study.

At a glance

  • An independent heat loss survey to check two contractors' air source heat pump quotes.
  • On site two days after booking, with every room measured and the real building materials investigated.
  • Two reports at two different room temperatures, so the client could see how the target temperature changes the heating needed.
  • A room-by-room split, so heat pumps and any electric heaters could be matched to each space.
Building
Church hall with main halls, offices and meeting rooms
Location
London
Client
Architects, on behalf of the church
Service
Site survey and room-by-room heat loss calculation
Reports
Two versions, designed at two different room temperatures
Year
2026

The brief

The church wanted to replace the boilers in its hall with air source heat pumps. Two contractors had quoted. One proposed ceiling and wall-mounted units, with electric radiators in the side rooms. The other proposed more wall-mounted units spread around the hall. The architects needed to know how much heat the hall actually needed before choosing.

How we did it

We offered a desktop calculation from plans or a site visit, and the church chose a site visit. We were on site two days after they confirmed. We measured every room and investigated the building materials, which in older buildings are often different from what the drawings show.

We produced two reports, one at a lower and one at a higher room temperature, so the client could see how the target temperature changes the heating needed. Each report gives a room-by-room breakdown and shows the heat lost through each part of the building fabric.

What the client received

  • A total heat load for the whole building at each design temperature.
  • A room-by-room split, so heat pumps could be sized for the main halls, with electric heaters in the small rooms if that strategy was chosen.

With independent figures, the architect could check each contractor's proposed units against what every room really needs, instead of comparing quotes on price alone.

Questions about this kind of job

How big a heat pump does a church hall need?
It depends on the hall's size, construction and target temperature. A room-by-room heat loss calculation is the only reliable way to size it, and it often shows the main hall and the small side rooms need different approaches.
Why get an independent heat loss calculation when contractors have already quoted?
Contractors sometimes size from rules of thumb, and quotes can differ a lot. An independent calculation gives you a figure to check every quote against, so you don't pay for oversized kit or end up with a cold hall.
Can you survey a church or church hall at short notice?
Usually yes. For this hall we were on site two days after the booking was confirmed, and the reports followed shortly after the visit.
Do you need plans for a site survey?
No. We measure on site. Plans help, and with good plans we can also offer a cheaper desktop calculation.
Independent. We don't sell heat pumps.

Have an unusual building? We'll measure it.

Send us your drawings or book a site survey. Email us and we'll come back with a price.

Email info@oneheatloss.co.uk →

Or WhatsApp 07496 898392.