How much does an air tightness test cost?
Short answer: a Pulse air tightness test (often just called an air test) costs from £175 + VAT per test, with the certificate issued the same day. Sites with several plots, repeat work and pre and post retrofit tests are priced on request.
What's included
- A Pulse low-pressure air tightness test, measured to CIBSE TM23. It takes around 10 minutes per home
- The building can stay occupied and furnished; there's no large fan in the doorway
- Your air permeability result, and the certificate issued on the day
- Lodging the result where your project needs it, for Approved Document L new builds and PAS 2035 retrofit
What changes the price
- Number of tests. Several plots on one site, or a programme of homes, costs less per test than a single visit.
- Location. We cover the whole of the UK. Remote one-off visits can cost more than a test on a route we're already running.
- Pre and post works testing. Retrofit programmes often need a test before and after the works. See retrofit air testing.
- Building type. Prices here are for dwellings. Ask us about larger or non-domestic buildings.
Who needs an air tightness test?
- New homes: new dwellings in England need an air tightness test for Approved Document L. The result feeds the SAP calculation and the as-built EPC.
- Retrofit projects: PAS 2035 retrofit often needs air tests before and after works to check the effect of insulation and ventilation changes.
- Heat pump and heat loss work: a measured air permeability can replace an assumed air change rate in a heat loss calculation.
Ventilation testing (BVT) for Part F is a separate test. See ventilation testing.
Pulse test or blower door test?
Both measure how much air leaks through a building's fabric. A blower door test pressurises the building to 50 Pa with a fan fitted in a doorway, which takes longer and needs the building prepared. A Pulse test measures at about 4 Pa with a short burst of air from a compact unit, so it's quicker and less disruptive. Pulse testing is recognised for new dwellings under Approved Document L. More on how it works: Pulse air tightness testing.
What if the test fails?
If a home doesn't meet its design air permeability, the usual next step is to find and seal the leaks, then test again. Common culprits are service penetrations, loft hatches, downlights, gaps around windows and doors, and unsealed boxing. We'll tell you on the day what the result means for your project.
How to prepare for an air test
- Close all external windows and doors and trickle vents, and open internal doors
- Fill water traps in sinks, showers and toilets
- Turn off extractor fans, MVHR and combustion appliances
- Make sure the home is finished: no open service holes, gaps or missing seals
Find air testing near you: Greater Manchester, West Midlands, Shropshire, London, Kent and across the UK.
Air tightness test cost FAQs
How much does an air tightness test cost?
Is an air test the same as an air tightness test?
How long does an air tightness test take?
Do new builds need an air tightness test?
What happens if my air test fails?
Book an air tightness test.
Email us the address or site, the number of homes and the date you need the certificate. We'll confirm the price and a slot.
Email info@oneheatloss.co.uk →Or WhatsApp 07496 898392.